New
AUTOMATIC BILGE PUMP AQUA VOID AUTO 500GPH 12V
€69.93
- Secure payment by Klarna
- E-mail us, we reply swiftly!
Description
Article no.: 10-13626-03
Johnson Pump Aqua Void Auto is an automatic pump with a time control function.
The pump works through an automated cycle, where the impeller spins briefly every 2.5 minutes. Each spin check is around 1s/interval and if it is found that there is a difference in torque between pumping air or water, the pump will start. This short rotation is designed to sense the presence of water. If water is detected, the pump switches to full operating mode, effectively removing the water until the bilge is dry.
When no water is detected, the pump stops and repeats the sensing cycle at the next 2.5-minute interval. This automated process ensures continuous monitoring and efficient water management, providing reliable performance and making the Aqua Void Auto bilge pump an essential solution for automated bilge water management.
The pump draws 3.7mA in standby mode.
The pump also has a second plus cable which allows direct acting
pumping via switch.
Capacity: 38Lit/min
Connection: Straight/90°. 19mm hose connection incl. check valve.
check valve.
Voltage: 12V
Power consumption: 2,7A
Max Head: 3,0m
Width (A) 2.75" (70mm)
Height (B) 4.69" (119mm)
Length (C) 5.24" (133mm)
Weight 11.2oz (0,32kg)
The pump works through an automated cycle, where the impeller spins briefly every 2.5 minutes. Each spin check is around 1s/interval and if it is found that there is a difference in torque between pumping air or water, the pump will start. This short rotation is designed to sense the presence of water. If water is detected, the pump switches to full operating mode, effectively removing the water until the bilge is dry.
When no water is detected, the pump stops and repeats the sensing cycle at the next 2.5-minute interval. This automated process ensures continuous monitoring and efficient water management, providing reliable performance and making the Aqua Void Auto bilge pump an essential solution for automated bilge water management.
The pump draws 3.7mA in standby mode.
The pump also has a second plus cable which allows direct acting
pumping via switch.
Capacity: 38Lit/min
Connection: Straight/90°. 19mm hose connection incl. check valve.
check valve.
Voltage: 12V
Power consumption: 2,7A
Max Head: 3,0m
Width (A) 2.75" (70mm)
Height (B) 4.69" (119mm)
Length (C) 5.24" (133mm)
Weight 11.2oz (0,32kg)